WARNING:This product contains nicotine. Nicotine is an addictive chemical.
Store

How to solve the problem of burning mouth of electronic cigarette?

2020/05/25|本站原创|Knowledge

What is the reason for the burning of electronic cigarette holder?

This problem is directly related to the coil data, the power used, the size of the atomizing chamber, and the air intake.

We know that the higher the power used, the higher the heat output. Under the same voltage, the lower the coil resistance is, the larger the volume of heating wire is, and the higher the heat is. The larger the atomization chamber, the lower the heat accumulation effect, and the larger the heat declaration space. The larger the air intake, the more heat it takes away.

Then we can analyze it very well, which aspect is the problem that causes the atomizer to heat up severely.

What's the reason for hot mouth of electronic cigarette? How to solve it?

If you are using nipple, hobo, ant ax, and so on, don't choose heating wire with lower resistance value and fancy heating wire (both low resistance and fancy heating wire need to use higher power to push, so as to reach a suitable task form).

Due to the fact that this kind of atomizer usually has less air intake, and the space of the atomization chamber is extremely tight, the heat distributed by the heating wire is easily transmitted to the atomizer chamber, and in this case, the temperature of the smoke is also very high, which is not suitable for use.

Therefore, it is recommended to use heating wire with diameter of 0.4 and below on this kind of atomizer.

Traditional taste type oil atomizers, such as KF series and Firebird series, all have very small atomization chamber and air passage, and the oil channel is usually small, and the electrode column base is not suitable for installing thick heating wire.

If the low resistance coil is used forcibly (under the power consistent with the data), problems such as smoke overheating, atomizer overheating and insufficient oil supply speed will inevitably occur.

What's the reason for hot mouth of electronic cigarette? How to solve it?

Electronic smoke heating wire

Therefore, it is also recommended to use heating wire with wire diameter less than 0.4 on this kind of atomizer.

The data used in the non taste oil dripper is very loose. They usually have large atomization chamber and great air circulation, so most heating wires can be compatible.

However, it is easy to overheat when using composite fancy heating wire double hair and coil with resistance less than 0.15 Ω. You can reduce the power to use as appropriate.

Although the atomizing chamber of the big smoke oil atomizer is larger than the taste type, it still can't determine the size of the oil drop atomizer, and the atomizing chamber is located outside the atomizer, so it can't distribute the heat very well (the stored smoke oil will absorb most of the heat, but it can cause the change of the taste of the smoke oil).

In addition, the top of the atomizing chamber of most oil storage atomizers has been designed to add the rich level of the taste, but it will also improve the temperature of the smoke (absolutely, reduce the cooling effect).

At the same time, the electrode column and oil guide structure also decide that the oil atomizer can not use the common coil of compound fancy heating wire and limit resistance.

As for the oil storage atomizer, the author recommends that the heating wire of 0.32 or 0.4 should be made of double wires, which is excellent in both coil cooling and smoke evaporation.

There's nothing to say about the finished atomizer. The manufacturer has designed everything. Players only need to use the recommended power provided by the manufacturer to get a good experience effect.

To sum up, the reason why the atomizer overheats is that the coil data with high compatibility with the atomizer and the appropriate power are not used. So we need to have an understanding of the atomizer in our hands, and then decide what kind of coil data and output power to use according to the characteristics of the atomizer itself.

Contact us

Follow us