WARNING:This product contains nicotine. Nicotine is an addictive chemical.
Store

Instructions for use of electronic cigarette

2020/06/16|本站原创|Knowledge

How to maintain the electronic cigarette? Instructions for the use of electronic cigarette: the main board technology of electronic cigarette is gradually mature after the development stage of voltage regulation, temperature control and super power. At present, most of the mainstream electronic cigarette hosts, both single battery and multi battery devices have very strong and stable output capacity. Although the equipment has maintained a relatively unified level, but learn a few methods, or can let the host in your hand keep the best state at any time.

Replace the battery in the host in time. Do not replace it after the prompt of weak current.

It seems that every user knows how to replace the battery in time, but it is not. Due to the sufficient series voltage of the dual battery equipment, the battery replacement frequency will be slower. But for a single battery host, continuous high-power output will consume battery power very quickly. The single battery after power consumption can not reach the high power output capacity set by the device, which will directly affect the use experience.

How to maintain electronic cigarette

Pay attention to clean the condensate or smoke oil near the host interface.

In the process of using the atomizer, there will inevitably be condensation or leakage. Even if these liquids are treated, the damage of the main engine can be effectively avoided. If not handled in time, the condensate will corrode the screws and other metal parts on the top of the host. Even for some hosts without electrode leakage protection, the liquid may flow into the host and cause greater damage to the host.

Regularly wipe the battery contacts and battery positive and negative poles inside the host.

Although most of the battery contact points inside the host are gold-plated or silver plated, oxidation can not be avoided. Regularly wipe the battery contacts and clean the positive and negative carbon of the battery to ensure the normal current output of the battery and the best output state of the host at any time.

How to maintain electronic cigarette

How to maintain the electronic cigarette: the electrode of the host needs to be cleaned frequently, and attention should be paid to maintenance.

In fact, the electrode interface part is the most vulnerable part of the host. Cleaning the oxide in the electrode part during daily use can ensure the smooth connection between the host and the atomizer. At the same time, if the main engine is not used for a long time, it is recommended to remove the atomizer. In particular, the longer positive screw oil atomizer should be removed in time to reduce the pressure of the atomizer on the host electrode.

When not in use, it is recommended to take down the smoke bomb, store the smoke rod and smoke bomb separately, and do not assemble them. Check if there is any condensate at the contact of smoke bomb, and wipe it out in time. The three most common problems and solutions in the use of small smoke

No matter what type of electronic cigarette equipment, it is very important to maintain regular maintenance. For the host, regular maintenance can ensure that the equipment will not be damaged and extend the service life. At the same time, it can ensure the output capacity of the host, maintain the most powerful output performance at any time, provide continuous power for the atomizer, and let users get the best use experience.

Contact us

Follow us